ITEM NO.: CH080711

UNIVERSAL HOLDER

Contents:

It's the essential disengaging tools for preventing the Flywheel, clutch and pulley from rotation. It's quite convenient that it will be done by collecting all of the tools in the same tool box after having finished using them.

ITEM NO.: CH080712

Pulley Holder

¡@

Contents:

Adjusting hole.  There are 2 adjusting holes for the minimum adjusting.  For the durable life of the tool and for securing the object in the minimum length of the belt, please don't pull the belt by violence.

ITEM NO.: CH080719

¡@

Pulley Holder

¡@

ITEM NO.: CH080720
¡@

Pulley ¡§T¡¨ Lock Wrench

Description:

Size:14mm/17mm

ITEM NO.: CH080724

PULLEY LOCK WRENCH
12-POINT MODEL
¡@

ITEM NO.: CH080725

PULLEY LOCK WRENCH
6-POINT MODEL

CH1520130

Cam Pulley Nut Tool 

* It fits Ducati Pantah and other 2 valve belt drives, as well as 4 valve 916 belt drives.

* Tool provides one holding tool and one socket tool with 1/2¡¨ drive.

* The holding tool allows you to hold the camshaft timing pulley from rotating and the socket tool to loosen and tighten the cam pulley retaining ring nut.

¡@

CH1520138

Wheel Bearing Locking Ring Tool

* It is designed to remove and install the lock rings that hold in the wheel bearings on most Triumph models.

* Material: Stainless Steel

¡@

CH1520133

Ducati Bevel Twin Sprocket Nut Socket & Nut

* You will need this tool to tighten the sprocket ring nut on a Ducati Bevel Drive Twin.

* This tool is a set, with a new nut.

¡@

ITEM NO.: CH080740

3-IN-1 SNAP RING PLIER
 
Contents:
Internal-External
Effective range 10-50mm

ITEM NO.: CH080741

3-IN-1 SNAP RING PLIER
 
Contents:
Internal-External
Effective range 10-50mm
¡@

ITEM NO.: CH080742

4-IN-1 SNAP RING PLIER

Contents:
Internal-External
Effective range 10-50mm

ITEM NO.: CH080798
¡@

Chain Clip Plier

Description:

Designed to simplify installation and removal of clip-type master links.

ITEM NO. CH090932

HAND SPARK PLUG TORQUE LIMITED SOCKET
 
Contents:
Size: 16m/m(5/8") or 21m/m(13/16")
Torque: 27N.m +-6%
Torque can be calibration
The other size and Torque accepts to order production.

ITEM NO.: CH090932-K

HAND SPARK PLUG TORQUE LIMITED SOCKET KITS
 
Contents:
Size: 16m/m(5/8") and 21m/m(13/16")
Torque: 27N.m +-6%
Torque can be calibration
The other size and Torque accepts to order production.

ITEM NO.: CH040971
Universal Holder Tool

ITEM NO.: CH040944
Pulley Holder, Heavy Duty

ITEM NO.: CH040954
Pulley Holder, 120mm-225mm

Large