CH152057-A
6mm and 8mm Jet Wrench

2 sizes in one, 6mm on one end and 8mm on the other end,
it fits round jets. Another one with a rubber cap fits 6mm hex jets.

CH152057-B
FCR carburetors Tool

It is an ideal tool for FCR carburetors.
It provides 4 tools¡G6mm hex for main jets, a 3mm Allen for
removing the float bowl and long-reach straight slot for pilot
jets. The longer one is an essential tool for reaching into recessed
cavities to adjust Keihin FCR carburetors.

¡@

CH1520137

2 Pcs Head Timing Tool 1000M/03

* Belt roller timing of two-valve head.

* It provides 2 sizes¡GM5x0.8 and M8X1.25

* It fits most Ducati bikes.

¡@

CH040917
Plug Socket Tool

Sizes available:
*16mm x 65L
*16mm x 72L
*21mm x 67L

*With Magnetic

¡@

CH040941
Tappet Adjust Tool(3pcs)

*Size:8,9mm

CH040941-1
Tappet Adjust Tool(4pcs)

Including:
*Size:8,9,10mm

CH040947
Valve Spindle Tool

*M6 x P1.0
*M8 x P1.25

Piston C-Type Install Tool

CH040946-18, dia.18
CH040946-20, dia.20
CH040946-22, dia.22

Piston Spindle Tool (4pcs)
CH040939

Size:dia.13,15,16,19

Piston Spindle Tool (5pcs)
CH040939-1

Size:dia.13,15,16,19,22

Valve Cotter Tool
CH040940

Valve Cotter Tool
CH040940-1

CH0807116
¡@

Micrometer Timing for 2 Stroke Engine

Description:

Size:M14 x P1.25

CH1520126

Alternator Cover Puller 

* It is essential tool to remove the left hand side cover on Ducati Engines.

* Puller provides one tool body (made from 6061 aluminum) and comes with 3 bolts (M10x1.25x50L 1 pc¡BM6x1.0x30L 2pc).

* It fits 1990-2009 Ducati Models 600 / 620 / 695 / 696 / 748 / 749 / 750 / 800 / 848 / 851 / 888 / 900 / 906 / 907 / 916 / 996 / 998 / 999 / 1000 / 1078 / 1098 / 1100 / 1198 .

CH0915237

Universal Tensioning Gauge for Cambelts

* This tensioning gauge can be used to adjust the tension on movement of the YAMAHA T-Max drive belt.

* Clear incremental marking with knurled knob for precise measurement.

* Dual scale allows reading from top bottom of tool (large and numbers for compatibility.

CH1520135

Timing Plug Wrench 

* It fits the straight-slot timing plugs on most motorcycles and ATVs.

* Blade size is 22mm (7/8¡¨) .

¡@

Valve Cotter Compressor Tool
CH040952

Valve Cotter Tappet Piston Spindle Tool
CH040965

Valve Cotter Compressor Tool
CH040965-1

ITEM NO.: CH080709

HEAVY DUTY VALVE SPRING
COMPRESSOR SET

ITEM NO.: CH051201-B

Motorcycle Coil Spring Compressor with Cover Steel

Range: 100 mm

CH152098

Cylinder Head Holders

* Sturdy stand holds cylinder heads safely and securely while you repair cracks, grind seats, clean carbon or perform guide work.

* There is ample clearance under heads for knurling and reaming valve guides.

CH1520128-01

Ducati Camshaft Alignment Tool <18 tooth sprocket>

* It fits the 851, 888, 916 and 996 engines.

* It allows you to keep the camshaft sprockets correctly aligned while installing of new cam belts.

* It also helps you to remove the nut attaching the pulley to the camshaft.

* Install the tool with lobes on the camshaft with the nut to be removed.

* Use a spanner socket to remove the nut.

* Material¡GAluminum 6061

¡@

CH1520128-02

Ducati Cam Belt Lock Tool <18 tooth sprocket>

* It fits 748, 916, 996, and Desmoquattro.

* It helps you to hold the loaded cam from rotating while installing the belts on 4 valve Ducati engines.

* It will not fit st4 or s4 engine.

* Slide the tool between the cam belt pulleys and slide the old belt off.

* Material¡GAluminum 6061

¡@

CH1520128-03

Ducati Short Cam Belt Lock Tool <20 tooth sprocket>

* It helps you to hold the loaded cam from rotating while installing the belts on 4 valve Ducati 749/999 Testastretta engines.

* Slide the tool between the cam belt pulleys and slide the old belt off.

* Material¡GAluminum 6061

¡@

CH091501-B
Hose Remover Pliers

Description:

* For easy remove of Ф4 ~ Ф10mm fuel & vacuum hose.
* The pliers have two different color of jaw, black & silver color.

• Black color jaw for tube end

• Silver color jaw for hose end

* With ¡§DIGS¡¨ on the black jaw , it can use inside small tube & hose.

¡@